Heritage Tumbled & Brushed Limestone

from

£47.00 /m²

Perfect for outside, Heritage limestone floor tiles in this format – brushed, tumbled and 20 mm thick – look wonderful in a variety of settings. The brushed finish makes for great non-slip qualities either for use on a patio or around a pool.

SUITABLE FOR

Floors, Exterior, Bespoke.

Select size

Size (width x length x depth)

Size

Clear

Delivery costs confirmed at checkout

Add sample

Order up to 4 free samples
One sample per product

Heritage Tumbled & Brushed is a 20mm thick limestone floor tile, making it a perfect choice to use outside, perhaps where you have used Heritage limestone flooring in a thinner format inside and want to carry the same limestone flooring outside for a seamless transition, between inside and out. The brushed finish also adds texture to the surface of the stone and provides for good non-slip qualities, perfect for using round the side of a pool. Please note: Limestone is a natural product and therefore stone tiles may vary in colour from one to another. This limestone is sometimes characterised by crystal lines which run across the face of the tile.

We offer a nationwide delivery service which is calculated according to product weight and size during the check-out process. We also ship internationally and will quote on request. Unless alternative arrangements have been made and depending on the size of the order, for floors & walls, deliveries will generally be palletised and undertaken using a 17.5 ton lorry, which is a similar size to a dustbin lorry. Pallets will then be lowered to the ground using a tail lift and pallet truck. The pallet will then be left at the nearest convenient location at the discretion of the driver, which may be the kerbside. For further information on our delivery service and charges please see our Delivery Information.

A good installation is the very foundation of a good floor and we recommend you seek advice prior to installation from one of our experts. Key things to consider are successful preparation of your substrate, the visual aspect of the room and the direction you lay the tiles, expansion joints and whether you will be installing over an underfloor heating system. For further information, please refer to our Installation Guide for Stone, Internal.
Adhesive: Eco-flex Stand. Set (H40 Gel) Adhesive (white) or Eco-flex Rapid Set (H40 Adv) Adhesive (white)
Sealant: Eco-seal Natural Finish Stone Sealer
Grout: Eco-wide Grout, Limestone (43 or 44)
Grout Width: 3mm upwards.

Keeping stone wall and floor tiles clean is easy. As stone is naturally porous it is important to seal the stone correctly first to prevent staining and make ongoing maintenance easier. We recommend establishing a regular cleaning schedule for ongoing maintenance and to help retain the stone’s aesthetic, with most stone surfaces benefiting from a wet clean around once a week. Stone is an acid sensitive material and should always be cleaned with a gentle pH-neutral detergent, regardless of the colour or finish of the stone. General household cleaners tend to be quite acidic and will etch the stone and the grout joint, and will damage the sealer. We recommend products from the ECOPROTEC range. For more information please refer to our Cleaning & Maintenance Guide for Stone.